Motorcycle Clip-On Handlebar Alignment Tool | Clip-On Buddy

Set both clip-on handlebars to the same angle using a repeatable physical reference instead of relying on visual judgement or separate measurements.

The Clip-On Buddy spans the fork tops and allows each measuring arm to reference the rear of the corresponding grip. Record the setting on one side, repeat it on the other and achieve a consistent left-to-right setup.

Compatibility

• Fork adaptor sizes: 41, 43, 45, 48, 50, 51, 54 and 55 mm
• Custom fork adaptor sizes available
• Suitable for fork spacings from 175 to 240 mm
• 60° of adjustment per side from horizontal

What’s included

• Complete Clip-On Buddy alignment tool
• One pair of fork adaptors in your selected size
• Measuring arms, datum pins, thumbscrews and washers

Key features

• Provides a repeatable reference for matching left and right clip-on angles
• Interlocking design for compact storage and transport
• Multiple standard adaptor sizes plus a custom-size option
• Additional adaptor pairs available separately
• Designed and manufactured in the UK by FF Moto

How to use

1. Attach the measuring arms to both halves of the slider.
2. Install the thumbscrews, washers and datum pins.
3. Extend the tool to the required width and position it over the fork tops.
4. Lightly tighten the thumbscrews and hold the tool flat against the top yoke.
5. Move one measuring arm until it touches the rear of the grip and record the setting.
6. Repeat on the opposite side to match the handlebar angles.

If selecting a custom size, enter the required fork diameter at checkout. The “Additional Fork Adaptor Pair” option is an accessory for existing Clip-On Buddy owners and does not include the complete tool.